Security module

From Center for Integrated Circuits and Devices Research (CIDR)
Jump to navigation Jump to search

Security Module and Hardware Key Generation

The pervasiveness and vast number of deployed nodes monitoring the environment makes security a fundamental challenge, especially in IoT applications. Security issues are expected to arise in terms of data authenticity, availability, integrity, and confidentiality[1]. Data as well as the sender of this data need to be verified and security must be assured down to the hardware level (i.e., each node needs to be confirmed to be). Security can be inserted in several levels. Chip authentication is necessary when nodes are added onto the network. Data sent between the nodes can also be secured via lightweight encryption. Finally commands for actuation need to be authenticated and verified. All these can be enhanced through machine learning.

Year 1 of this project focuses on the use of physically unclonable functions (PUFs) as unconditionally secure hardware key. This requires two things: (1) characterization of the technology and (2) a survey of existing topologies. As such, these two prerequisites are the target activities for the first quarter. The rest of the activities for the year are shown in the figure below.

CIDRP3-obj4-y1.png

Physically Unclonable Functions

In the recent past, Physically Unclonable Functions (PUFs) have emerged as potentially highly secure and lightweight solution to ensure data and hardware security, assuring trustworthiness down to the chip level[2]. A PUF is a function that maps an input (digital) challenge to an output (digital) response in a repeatable but unpredictable manner, leveraging on chip-specific random process variations. Machine learning was also proposed to improve authentication with PUF[3].

PUFs have 3 main properties: randomness, uniqueness and reliability[4]. Randomness refers to the bias of the generated key, or the ratio between logic 1 and logic 0 bits in the key (ideally, the bias would be 50%). Uniqueness is measured through the inter-PUF hamming distance fraction, or the percentage of PUF bits that are different between keys. Ideally, we would want a hamming distance fraction of 50%. Reliability, on the other hand measures the intra-PUF hamming distance or the bit error rate (BER) over several trials and under process, voltage and temperature (PVT) variations. Ideally, the BER should be 0, signifying no change in bit values despite PVT variations.

The concept of using device mismatches for started in the year 2000 with the IC identification (ICID) [5]. Using delay differences due to random mismatch was shown to also give the same function with the arbiter PUF [6][7]. One of the most common delay-based PUFs is the ring oscillator (RO) PUF,[8] where the frequencies of a pair of ring oscillators are compared and decide the bit value (e.g. 1 if fB > fA). The power-on sate of memory elements can also be used to generate the hardware key, as demonstrated with the latch PUF[9], and more recently even for the RRAM crossbar[10]. Leveraging on the memory cell's metastability [11]. Other types of PUFs have also been explored, such as the VIA PUF[12] and oxide rupture PUF[13], to name a few.

PUF Name ICID Arbiter Latch RO INV_PUF VIA Oxide RRAM
Type Analog Delay Memory Delay Monostable others others NVM
Technology (nm) 350 180 130 65 65 180 55 130
Worst Native Instability at Nominal Condition (%) 1.3 4.82 3.04 2.8 2.34 N/A N/A 0.0006
Nominal Voltage 2.5 1.8 1 1.2 1 1.8 1 5.5
Maximum Instability under PVT Variation (%) 5 4.82 5.46875 3.9 5.72 -- -- 0.0006
Voltage Range (V) 1.1-5 1.8+/-2% 0.9-1.2 1.2 0.6-1 0.01904 0.0000238 0.0006
Temperature Range (C) -25-125 27-70 N/A -40,25,90 25-85 1.6-2 0.8-1.4 2.5-5.5
Bit Error Rate (%) N/A 4.82 5.46875 N/A N/A 6
BER after stability enhancement N/A N/A N/A N/A N/A 0.01904 0.0000238 0.0006
Energy per bit (pJ/bit) 8333.333333 0.17125 0.93 N/A 0.015 N/A 5.2 3.028
Area (sq.um) 23436 1468944 9450 241000 6000 1.06E+05 2.86
Bits 112 64 180 3840 3040 128 8.19E+03
Area per bit (F2 / bit) 1708.163265 708402.7778 3106.508876 14854.53649 6000 1.05E+06 218.2 169.2
Bias N/A N/A N/A N/A 0.5015625 N/A 0.5
Inter-PUF FHD 0.4910714286 0.38 0.50546875 0.495 0.5013671875 N/A 1
Intra-PUF FHD 0.013392857 0.02 3.04 0.028 0.0033636719 N/A 0.031 0.044
# of possible CRPs 132 4.5036E+15 1 256 11 1 64


Looking at PUFs implemented on ASIC, we can see that the majority of the PUFs are still weak PUFs, that is, they have limited challenge-response pairs (CRPs), as opposed to strong PUFs. Some of the trends in terms of area, stability and energy is shown in the figure below, and can be found in the PUFdb[14] and HWsecdb[15], which are public databases of PUFs, TRNGs and other hardware security implementations in ASIC.

Curriculum and Manpower Development

As part of the objective of the CIDR program to continuously improve the curriculum and manpower, the topic on physically unclonable functions was incorporated in the EE 226 (Digital Integrated Circuits) as a possible area of research. The introduction lecture can now be found in youtube[16].


References

  1. ↑ T. Zia and A. Zomaya, "Security Issues in Wireless Sensor Networks," 2006 International Conference on Systems and Networks Communications (ICSNC'06), 2006, pp. 40-40, doi: 10.1109/ICSNC.2006.66.
  2. ↑ R. Maes, V. Rozic, I. Verbauwhede, P. Koeberl, E. van der Sluis, V. can der Leest, "Experimental Evaluation of Physically Unclonable Functions in 65 nm CMOS", in European Solid State Circuit Conference (ESSCIRC), 2012, pp. 486489.
  3. ↑ B. Chatterjee, D. Das, S. Sen, "RF-PUF: IoT Security Enhancement through Authentication of Wireless Nodes using In-situ Machine Learning",  IEEE International Symposium on Hardware Oriented Security and Trust (HOST), 2018, pp. 205-208.
  4. ↑ A. Alvarez and M. Alioto, “Security down to the Hardware Level,” in Enabling the Internet of Things - from Circuits to Networks, Springer, 2017.
  5. ↑ K. Lofstrom, W. R. Daasch, and D. Taylor, “IC Identification Circuit using Device Mismatch,” ISSCC Dig. Tech. Papers, 2000, pp. 372–373.
  6. ↑ J. W. Lee, B. Gassend, G. E. Suh, M. van Dijk, and S. Devadas, “A Technique to Build a Secret Key in Integrated Circuits for Identification and Authentication Applications,” IEEE Symp. VLSI Circuits, 2004, pp. 176–179.
  7. ↑ D. Lim, J. W. Lee, B. Gassend, G. E. Suh, M. Van Dijk, and S. Devadas, “Extracting Secret Keys from Integrated Circuits,” IEEE Trans. Very Large Scale Integr. Syst., vol. 13, no. 10, pp. 1200–1205, 2005.
  8. ↑ R. Maes, V. Rozic, I. Verbauwhede, P. Koeberl, E. van der Sluis, and V. can der Leest, “Experimental Evaluation of Physically Unclonable Functions in 65 nm CMOS,” in European Solid State Circuit Conference (ESSCIRC), 2012, pp. 486–489.
  9. ↑ Y. Su, J. Holleman, and B. Otis, “A 1.6pJ/bit 96% Stable Chip-ID Generating Circuit using Process Variations,” ISSCC Dig. Tech. Papers, 2007, pp. 406–408.
  10. ↑ Y. Pang, B. Gao, D. Wu, S. Yi, Q. Liu, W.-H. Chen, T.-W. Chang, W.-E. Lin, X. Sun, S. Yu, H. Qian, M. F. Chang, H. Wu, "A Reconfigurable RRAM PUF Utilizing Post-Process Randomness Source with <6×10-6 N-BER," 2019 IEEE International Solid- State Circuits Conference - (ISSCC), San Francisco, CA, USA, 2019, pp. 402-403.
  11. ↑ S. K. Mathew, S. K. Satpathy, M. A. Anders, H. Kaul, S. K. Hsu, A. Agarwal, G. K. Chen, R. J. Parker, R. K. Krishnamurthy, and V. De, “A 0.19pJ/b PVT-Variation-Tolerant Hybrid Physically Unclonable Function Circuit for 100% Stable Secure Key Generation in 22nm CMOS,” ISSCC Dig. Tech. Papers, pp. 278–280.
  12. ↑ B. D. Choi, T. W. Kim, and D. K. Kim, “Zero bit error rate ID generation circuit using via formation probability in 0.18 µm CMOS process,” IET Journals Mag., vol. 50, no. 12, pp. 876–877, 2014.
  13. ↑ M.-Y. Wu, T.-H. Yang, L.-C. Chen, C.-C. Lin, H.-C. Hu, F.-Y. Su, C.-M. Wang, J. P.-H. Huang, H.-M. Chen, C. C.-H. Lu, E. C.-S. Yang, R. S.-J. Shen, “A PUF Scheme Using Competing Oxide Rupture with Bit Error RateApproaching Zero,” in IEEE International Solid State Circuits Conference (ISSCC), 2018, pp. 130–132.
  14. ↑ M. Alioto, A. Alvarez, "Green IC Physically Unclonable Function database," [Online]. Available: http://www.green-ic.org/pufdb.
  15. ↑ M. Alioto, “HW security primitives database," [Online]. Available: http://www.green-ic.org/hwsecdb
  16. ↑ https://youtu.be/JfNnSYuIOkc
Retrieved from "https://cidr.up-microlab.org/index.php?title=Security_module&oldid=538"